Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-1558002.png)
Install hint:
When inserting master brake cylinder into brake booster, make sure pressure rod of brake booster and pressure rod of master brake cylinder are in
one plane.
With DSC
Removing And Installing / Replacing the Master Brake Cylinder For DSC
Note:
General information. See: Antilock Brakes / Traction Control Systems/Description and Operation
After completing work, bleed brake system ABS/ASC+T. See: Brake Bleeding/Service and Repair/With ABS/DSC
Remove expansion tank.
Remove battery box (R50).
Remove intake filter housing (R53).
Disconnect brake pipes (1).
Brake pipe couplings
M10 x 1 ............................................................................................................................................................................................................. 14 Nm
M12 x 1 ............................................................................................................................................................................................................. 14 Nm
Remove nuts (2).
Disconnect connector (3).
Remove brake master cylinder from brake booster.
Install hint:
Replace self-locking nuts.
Brake master cylinder to brake booster (vacuum) ....................................................................................................................................................... 21 Nm