Cooper S (R53) L4-1.6L SC (W11) (2004)
Coolant: Fluid Type Specifications
Coolant
Coolant Type
the MINI uses a 50/50 coolant solution compatible with standard Kevlar reinforced EPDM (Ethylene Propylene Diane Monomer) cooling hoses. Do
not exceed a 60% ratio of A/F - Coolant. Comply with water requirements.
BMW / MINI Anti-Freeze/Coolant contains no nitrates or phosphates and is formulated to prevent excessive silicate drop-out.
One gallon container .................................................................................................................................................... BMW Part No. 82 14 0 031 133.
Do not mix BMW Anti-Freeze/Coolant with different antifreezes which contain nitrates or phosphates and a high silicate formulation. Severe engine
damage may result by doing so.
Water Requirements
Water Requirements
Only tap water of drinking quality may be used.
--
Appearance
colorless, clear
Residue
without suspended matter
pH value
6.5 - 8.0
Total Hardness
max. 357 PPM Calcium Carbonate
Chloride content
max. 100 mg/l
Sulfate content
max. 100 mg/l