Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-559004.png)
After mounting, first release clamps and then inflate tire (without valve).
Increase pressure up to 3.3 bar (330 kPa) in steps jumping pressure).
If the tire bead does not slide onto rim edge all around, do not increase pressure. Instead, tire must be deflated and tire bead pressed off; then coat rim
flange with mounting paste again and inflate again up to 3.3 bar. When the beads are resting properly on the rim shoulders, increase inflation
pressure to max. 4.0 bar to "settle" the tire.
Screw in valve and correct tire pressure.
