Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-561002.png)
Position special tool 36 1 093 and special tool 36 1 201 as shown on rim flange.
Slide special tool 36 1 091 136 1 092 between tire bead and rim flange, lever tire bead over rim flange move into position shown.
Secure special tool 36 1 091 /36 1 092 with connecting cable of special tool 36 1 201
Slide a second special tool 36 1 091 /36 1 092 on right next to first special tool 36 1 091 /36 1 092 between tire bead and rim flange.
Lever tire bead over rim flange.
Remove first special tool 36 1 091 /36 1 092 and slide on right next to second special tool 36 1 091 /36 1 092 between tire bead and rim flange and
lever tire bead over rim flange.
Repeat this procedure in clockwise direction until tire bead is located fully over rim flange.
Swivel or tilt fitting head into position and allow it to snap into place.
Lever lower bead with tire iron over mounting finger.
Allow fitting machine to run forward in clockwise direction until tire is fully detached from rim.
