Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-562001.png)
Wheel Bearing: Service and Repair
Replacing Bearings (Wheel Hub) For Front Wheel
Remove road wheel.
Remove brake disk.
Release hub collar nut with cross cut chisel and remove nut (1).
Install hint:
Fit new collar nut.
Output shaft to angular contact ball bearing
M22 x 1.5 stake nut ......................................................................................................................................................................................... 182 Nm
Note: Use only once.
Remove ABS sensor bolt and sensor (1) to avoid damage when removing hub.
ABS sensor to steering knuckle
Allen headed bolt ...................................................................................................................................................................................................... 8 Nm
Release four bolts (1) holding wheel hub to knuckle carrier.
Wheel hub to knuckle carrier
M10 ................................................................................................................................................................................................................... 56 Nm
Remove wheel hub from knuckle and drive shaft.
Install hint:
