Cooper S (R53) L4-1.6L SC (W11) (2004)
Release screws (4).
Remove switch.
Installation:
Insert screws (4) slightly.
Fit shim, retaining ring and nut.
Tightening torque 24 11 12AZ .
Mount special tool 24 4 270.
Tighten screw (1).
Align position switch to "N".
Tighten down screws (2).
Tightening torque 24 11 12AZ .
Installation:
Connect gear position switch plug
Installation:
-
Move selector lever to ''P'' position
-
Grip clamping sleeve (1)
-
Slacken nut (2).
-
Press shift lever (3) into park position, then release again
-
Press cable (4) in direction of arrow, then release again
-
Grip clamping sleeve (1) and tighten down