Cooper S (R53) L4-1.6L SC (W11) (2004)
Fusible Link: Service and Repair
Fuseable Link - Replace (COOPER S)
CAUTION!
Observe safety instructions.
Investigate cause of triggering of safety battery terminal. To do so, read out fault memory of airbag control unit. Note fault messages stored in memory.
Rectify faults. Then clear fault memory.
Remove battery.
Remove nut (1) securing cable to battery positive terminal cable.
Tightening torque 5 Nm.
Release battery cable from terminal (2).
Disconnect SBK connector (3).
Release clips (1) securing fuseable link cover.
Remove cover (2).