mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Base of Tab Connector Housings|Page 9964 > < Base of Tab Connector Housings|Page 9962
Page 10
background image

Feed special tool 61 1 135 past side of contact.
Press special tool 61 1 135 in direction of arrow.
Pull wire (1) with socket contact out of radio plug (2).

Removing MQS contacts from contact carrier:

Press lock (1) in direction of arrow and pull housing (2) out of radio plug.

Press lock (1) in direction of arrow. Pull contact carrier (2) out of housing (3).

NOTE:  When the contact carrier is pulled out, the secondary locks of the socket contacts are raised.

Base of Tab Connector Housings|Page 9964 > < Base of Tab Connector Housings|Page 9962