Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-1717001.png)
Power Steering Bleeding: Service and Repair
Bleeding Power Steering Unit
Caution: Before removing the oil tank cap, clean the tank and its immediate vicinity thoroughly. No dirt is allowed to enter the system.
1. Topping up when engine stationary: Fill oil tank until level reaches "MAX" mark on dipstick.
2. Bleeding: Start engine. Turn steering wheel twice each as far as left and right lock.
3. Oil level check with engine off: Top up hydraulic fluid to "MAX".
