mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Shift Linkage, M/T > < Procedures|Page 9132
Page 6
background image

W10 only:

Remove battery box .
Release clips (1) for shift cable at housing.
Detach shift cable from ball joint (2).
Pull shift cable (3) out of housing (4). 
Remove housing and cable from vehicle. 

W11, W17 only:

Remove intake filter housing .
Use special tool 23 4 010  to detach shift cable assembly (1) at ball joint. 
Detach shift cable at stop/bracket (2) and remove. 

Shift Linkage, M/T > < Procedures|Page 9132