Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1337004.png)
Slide driver's seat (1) fully forward and fold backrest back.
Slide front passenger seat (2) fully forward (easy entry).
To prevent headlining from tilting, tape off luggage compartment lid cutout at top right and bottom left with yellow plastic adhesive tape (3).
NOTE: The same procedure applies to right-hand drive vehicles. On right-hand drive cars, tape off areas at top left and bottom right.
Detach edge protection (1) at top.
Release expanding rivet (2).
Detach headlining (4) at clip (3).
Lay headlining (4) downwards.
Installation note:
IMPORTANT: First fix headlining (4) with expanding rivet (2) and clip (3) to avoid incorrect an installation position or tension in the headlining (4).
