mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Front Left or Right Entrance Cover Strip|Page 9274 > < Removing and Installing/Replacing Front Left or Right Entrance Cover Strip|Page 9272
Page 1
background image

Scuff Plate: Service and Repair
Removing and Installing/Replacing Top Trim on Rear Apron

51 46 050 Removing And Installing/replacing Top Trim On Rear Apron

Open/take out luggage compartment floor trim panel.
Release expansion rivets (1).
Release trim upwards from clips (2) and feed out.

Installation:

If necessary, replace faulty expansion rivets (1) and clips (2).
Make sure seal for rear lid is correctly seated.

Removing and Installing/Replacing Front Left or Right Entrance Cover Strip|Page 9274 > < Removing and Installing/Replacing Front Left or Right Entrance Cover Strip|Page 9272