Cooper S (R56) L4-1.6L Turbo (N14) (2009)
NOTE: Start at the front or rear, depending on the model.
IMPORTANT:
-
Risk of damage.
-
Raise window cavity cover strip (3) no more than 5 mm in each levering operation, otherwise the strip will be bent.
Position special tool 00 9 318 on door trim panel (1).
Slide screwdriver (2) into special tool 00 9 324 and lever window cavity cover strip (3) upwards no more than 5 mm.
Guide special tools 00 9 324 and 00 9 318 towards front/rear and lever out window cavity cover strip (3) in the process.