Cooper S (R56) L4-1.6L Turbo (N14) (2009)
Detach locking clip (1).
Installation:
Check bearing bushings of clutch pedal and replace if necessary.
Lightly grease bearing bushings.
Check retaining clip (1) and replace if necessary.
Make sure retaining clip (1) is correctly engaged.
Disengage return spring (2) and remove clutch pedal (3)
Modify brake light switch.
Removing and Installing/Replacing Brake Pedal
35 21 000 Removing And Installing/Replacing Brake Pedal
NOTE:
-
The brake pedal cannot be individually replaced.
-
The procedure is described in Removing and installing bearing block.
Replacing Spring For Brake Pedal
35 21 041 Replacing Spring For Brake Pedal
Necessary preliminary tasks:
-
Remove trim panel for pedal assembly.