Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-895002.png)
Important:
Check rubber plugs (1) in brake master cylinder for damage and replace if necessary.
Press expansion tank (2) vertically onto brake master cylinder.
34 31 500 Removing and installing/replacing brake master cylinder
Special tools required:
^
32 1 270
Necessary preliminary tasks:
^
Remove expansion tank.
^
Read and comply with General Information.
After completing tasks, bleed brake system with DSC.
Important:
Do not bend brake lines.
Close off brake lines and brake master cylinder with plugs 32 1 270.
Unfasten brake lines (1).
Installation:
Tightening torque 34 32 1AZ.
Release nuts (2) and feed brake master cylinder out of brake booster.
Installation:
Replace self-locking nuts.
Tightening torque 34 31 1AZ.
Installation:
Replace sealing ring (1).
Check rubber plugs (2) and replace if necessary.
