Cooper S (R56) L4-1.6L Turbo (N14) (2009)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
11 23 010 Removing and installing or replacing vibration damper (N14)
Necessary preliminary tasks:
^
Remove right wheel arch line.
^
Remove drive belt.
Release screws (1).
Tighten torsion damper to crankshaft hub.
1AZ Torsion damper to crankshaft hub
M8x16 ............................................................................................................................................................................................................... 28 Nm
Remove vibration damper.
Assemble engine.