Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-366002.png)
Installation:
Piston rings with "TOP" identification must point to piston crown.
Installation:
Piston rings with "TOP" identification must point to piston crown.
1. Plain compression ring
2. Taperface ring
3. Two-part oil scraper ring
Note:
Oil control ring comprises two steel band rings (1) and a support spring (2).
Installation:
Insert support spring (2) into piston ring groove and then fit steel band rings (1) so that contact points are offset by approx. 120 °.
