Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-435002.png)
Employ a second person for gripping when releasing central bolt (1).
Fit special tool 11 9 280 on hub for vibration damper with screws (2).
Release central bolt (1).
Release central bolt in direction of arrow.
Tighten torsion damper (hub) to crankshaft (central bolt)
11 21 1AZ Torsion damper (hub) to crankshaft (central bolt)
M14 x1.5 x74
Jointing torque ................................................................................................................................................................................................... 50 Nm
Torque angle ........................................................................................................................................................................................................ 180 °
Note: Replace screws, Lightly oil screws and threads
Release bearing pins (1 and 2).
Tighten Screw plug, timing case lower section
6AZ Screw plug, timing case lower section
M16x1.5 ............................................................................................................................................................................................................ 30 Nm
Note: Replace seal.
Remove hub (3) towards front.
