Cooper S (R56) L4-1.6L Turbo (N14) (2009)
Timing Component Alignment Marks: Locations
The procedure for "Checking Camshaft Timing" can be found under Camshaft, Engine See: Camshaft, Lifters and Push Rods/Camshaft/Testing and
Inspection
The following is taken from " Adjusting camshaft timing (N14)"
See: Camshaft, Lifters and Push Rods/Camshaft/Adjustments
Important:
Risk of damage! to chain drive.
To open central bolt, mount special tool 11 9 551 on camshaft.
If the setting gauges cannot be positioned, grip the camshaft with an open-end wrench to release the central bolt.