Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1117002.png)
Release screws (1).
Remove housing cover (2) and PCB (3) underneath.
Remove switch unit (1) in upward direction.
Installation:
Switch unit (1) can only be installed in one position. PCB (4) can be inserted turned through 180°.
Position of magnet sensor (3) of PCB (4) must match up with permanent magnet (2) of switch unit (1).
Remove guide (1) in upward direction.
Installation:
Guide (1) can only be installed in one position.
Fit seal (2) on guide (1) and insert in switch housing.
