Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-826001.png)
Flex Plate: Service and Repair
11 22 500 Removing and installing or replacing flywheel (N14)
Special tools required:
^
11 9 590
Necessary preliminary tasks:
^
Remove transmission.
^
Remove clutch.
Lock flywheel with special tool 11 9 590.
Flywheel for automatic transmission.
Release flywheel bolts (1).
Tighten flywheel to crankshaft (automatic transmission)
1AZ Flywheel to crankshaft (automatic transmission)
M9x1.25
1. Jointing torque ................................................................................................................................................................................................. 8 Nm
2. Jointing torque ............................................................................................................................................................................................... 30 Nm
Note: Replace screws
Installation:
Flywheel is secured with a dowel pin.
Fit new flywheel screws.
Clean crankshaft thread for flywheel screws.
Flywheel for manual gearbox.
Flywheel with and without dual-mass: release flywheel bolts (1).
Tighten DM flywheel to crankshaft (manual transmission)
2AZ DM flywheel to crankshaft (manual transmission)
M9x1.25
1. Jointing torque 8 Nm
2. Jointing torque 30 Nm
