Cooper S (R56) L4-1.6L Turbo (N14) (2009)
NOTE: Windows (1) with fitted seals (3) or sprayed-on surrounds:
-
Moisten cutting wire (4) and seals (3) on window (1) with water
-
Insert cutting wire (4) in bend (without kinking) between window (1) and body cutout (2)
Protecting car interior:
-
To avoid damage and if necessary dirt, protect A-pillars, roof and instrument panel by means of parabolic tool (1) or plastic washer (2)
-
Move parabolic tool (1) during removal so that wire cannot get caught
-
Always guide plastic washer (2) between wire and panel
Starting removal:
-
Place windlass (1) on windscreen
-
Feed wire end into coil of windlass (1)
NOTE: Coil can only be turned in one direction.
-
Make sure the wire is always situated in the guide channel of the windlass (1)
-
Fit reversible ratchet (2) on coil and tension wire
-
Start by cutting lower adhesive bead
-
Grip second wire end in special tool 51 3 270