Cooper S (R56) L4-1.6L Turbo (N18) (2011)
/l4-1.6l_turbo_(n18)/Page-379001.png)
Sound Proofing / Insulation: Locations
41 00 ... Position of shaped parts for cavity acoustic baffle
In order to reduce the interior noise and to prevent condensation water, the cavities are partitioned in specific areas of the body. To do this, shaped parts
are inserted in the cavities. These shaped parts adapt themselves optimally due to heating of the body to approx. 180 °C by expansion to the shape of the
cavities.
As it is not possible to heat the body to this extent for a body repair, a different procedure has been laid down for this instance.
