Cooper S Clubman (R55) L4-1.6L Turbo (N14) (2008)
/l4-1.6l_turbo_(n14)/Page-2247001.png)
Ambient Light Sensor: Service and Repair
61 35 177 - Removing and installing (replacing) rain/light sensor
Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) See: Service Precautions/Vehicle Damage Warnings/Notes
on ESD Protection (Electro Static Discharge).
Unclip cover (1) in direction of arrow and remove.
Pull out locks (1) in direction of arrow and remove rain/light sensor (2).
Disconnect plug connection (3).
Installation Note:
Do not damage optical element covered by rain/light sensor (2).
If necessary, initialize rain/light sensor See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Rain Sensor/Testing and
Inspection (2).