Cooper S Clubman (R55) L4-1.6L Turbo (N14) (2008)
Fuel Gauge Sender: Service and Repair
Removing and Installing / Replacing Fuel Filter with Fuel Level Sensor (50-Litre Tank)
16 14 017 - Removing and installing/replacing fuel filter with fuel level sensor (50-litre tank)
Special tools required:
-
16 1 020 See: Tools and Equipment/Electrical / Mechanical Repair/16 1 020 Pin Wrench
Recycling
Fuel escapes when fuel lines are detached. Have a suitable collecting container ready.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Important!
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!
Before starting the engine for the first time:
-
Fill fuel tank with at least 5 liters of fuel.
Necessary preliminary tasks:
-
Draw off fuel from fuel tank See: Service and Repair/Procedures
-
Remove rear seat See: Body and Frame/Seats/Service and Repair/Rear Seat - Through-Loading System/Removing and Installing or Replacing
Rear Seat
-
Remove complete sensor unit (left) See: Removing and Installing / Replacing Fuel Pump with Fuel Level Sensor (50-Litre Tank)
Installation:
Secure a cable to hose pack through left service opening in tank.
The cable facilitates reinstallation of the hose pack.