mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Knee Protection, Drivers Side, Left|Page 10446 > < Removing and Installing/Replacing Left B-Pillar Sensor|Page 10441
Page 1
background image

Knee Diverter: Service and Repair
Removing and Installing/Replacing Knee Protection, Drivers Side, Left

51 45 250 - Removing and installing/replacing knee protection, driver's side, left

Necessary preliminary tasks:

-

Remove trim for instrument panel at bottom left See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removing and Installing/Replacing Bottom Right Trim for Instrument Panel

-

Remove air outlet vent at side left See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removing and
Installing/Replacing Cover for Air Outlet Vent on Left (or Right)

Release screws (1).

Release screws (1).
Remove knee protection (2).

Removing and Installing/Replacing Knee Protection, Drivers Side, Left|Page 10446 > < Removing and Installing/Replacing Left B-Pillar Sensor|Page 10441