mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

ABOUT US
Removing and installing/Replacing Cable for Front Engine Hood Locks (with Glovebox)|Page 12572 > < Removing and installing/Replacing Cable for Front Engine Hood Locks (with Glovebox)|Page 12570

Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)

Page 2
background image

Disconnect Bowden cable (2) on left/right from holders (1).
Feed Bowden cable (2) on left out of bore (3).

Installation:

Lay Bowden cable (2) without kinks.

Bowden cable for left hood/bonnet lock, left side:

Note:

For purposes of clarity, illustration shows brake booster removed.

Disconnect Bowden cable (1) from holder (2).

Installation:

Lay Bowden cable (1) without kinks.

3 - Bore 

Removing and installing/Replacing Cable for Front Engine Hood Locks (with Glovebox)|Page 12572 > < Removing and installing/Replacing Cable for Front Engine Hood Locks (with Glovebox)|Page 12570