Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)
Note:
The following components must be modified when the front axle support is replaced:
-
Stabilizer See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Axle/Removing and Installing/Replacing Front
Stabilizer
-
Power steering pump (except W17 engine)
-
Steering gear See: Steering and Suspension/Steering/Steering Gear/Service and Repair/Removing and Installing Power Steering Gear
-
Control arm See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Front Axle/Removing and Installing Left or Right Control
Arm
-
Ball joint See: Steering and Suspension/Suspension/Ball Joint/Service and Repair for control arm
-
Retaining clip for underbody paneling
Release screws (1) on stoneguard and modify stoneguard.
Installation:
Tightening torque 31 11 7AZ See: Specifications/Mechanical Specifications/Suspension/System Specifications.
Installation:
Modify retaining clip (1), replace if necessary.