mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing / Replacing Convertible Top Tension Bar Bearings|Page 13026 > < Removing and Installing / Replacing Convertible Top Tension Bar Bearings|Page 13024
Page 5
background image

Note:

Retrofit panel without felt in marked area (1).

Removing and Installing/Replacing Roof Crossbar

54 34 380 - Removing and installing/replacing roof crossbar

Necessary preliminary tasks:

-

Remove guide rail panel

-

Remove convertible top fabric partially See: Removing and Installing/Replacing Left or Right Guide Rail Panel

-

Remove roofliner See: Convertible Top Canvas/Service and Repair from roof crossbar

-

Unlock retaining hook See: Interior Moulding / Trim/Headliner/Service and Repair/Removing and Installing/Replacing Left or Right Roofliner In
Convertible Top

Removing left/right tension straps if necessary (dependent on build date):

Release screw (1).
Remove tension strap from roof crossbar.
If feeding out wiring harness (3) at a later stage, if necessary detach felt strip (2) carefully from roof crossbar.

Removing and Installing / Replacing Convertible Top Tension Bar Bearings|Page 13026 > < Removing and Installing / Replacing Convertible Top Tension Bar Bearings|Page 13024