Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)
/l4-1.6l_sc_(w11)/Page-2154001.png)
Tailgate Shock / Support: Service and Repair
51 24 070 Removing And Installing/Replacing Retractor
Necessary preliminary tasks:
-
Remove panel for rear lid.
-
Partially remove emergency release device.
Release screw (1) on retractor Bowden cable (2) and feed out in direction of arrow.
Installation: 4AZ Bowden cable, retractor, to body....................................................................................................................................................18.5 Nm
Important: When removing retractor Bowden cable (2), protect bumper against damage.
Warning: Retractor Bowden cable is tensioned (risk of injury).
Release screws (1) on Bowden cable holder (2).
Installation: 5AZ Bowden cable, retractor, to rear lid...................................................................................................................................................7.6 Nm
Release nuts (1) on retractor (2) and remove retractor (2) towards top.
