Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)
/l4-1.6l_sc_(w11)/Page-1341002.png)
Disconnect brake hose (1) from brake line.
Installation:
Tightening torque 34 32 1AZ See: Specifications/34 32 Brake Lines.
Pull brake hose out of retaining fixture on shock absorber.
Release banjo bolt (2) and detach brake hose (1) from brake caliper.
Installation:
Tightening torque 34 32 2AZ See: Specifications/34 32 Brake Lines.
Replace sealing rings.
Mount and tighten brake hose on brake caliper first, then on brake line/brake hose point of connection.
Important!
Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.
