mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Servodrive for Flap Control Gear (IHKA)|Page 10669 > < Removing and Installing/Replacing Servodrive for Flap Control Gear (IHKA)|Page 10667
Page 2
background image

Slacken cable (1).
Disengage drag link (2) in direction of arrow.
Release catch (4).
Disengage servodrive for temperature control with holder (3) and linkage towards bottom front.

Installation:

Ensure correct seating.

Separate drag link (1) from control lever (2).
Release screws (4).
Remove servodrive for temperature control (5) from holder (3).

Installation:

Ensure correct seating.

Removing and Installing/Replacing Servodrive for Flap Control Gear (IHKA)|Page 10669 > < Removing and Installing/Replacing Servodrive for Flap Control Gear (IHKA)|Page 10667