Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)
/l4-1.6l_sc_(w11)/Page-363008.png)
-
Compare specified values with actual values
-
If necessary, adjust front axle and rear axle
-
Perform output measurement in accordance with equipment manufacturer's instructions.
-
Carry out steering angle sensor adjustment
-
Save and print out test record.
-
Remove chassis/wheel alignment system
-
Drive vehicle off lifting platform.
Test Conditions for Chassis/Wheel Alignment Check
32 00 ... - Test conditions for chassis/wheel alignment check
Observe the following test conditions prior to the chassis/wheel alignment check:
1. Correct and identical rim and tire sizes.
2. Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
3. Correct tire inflation pressure (see instruction plate on car).
4. Wheel bearing clearance OK
5. Steering backlash OK
6. Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
