Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)
Control Module: Service and Repair
24 61 500 - Removing and installing or replacing EGS control unit
Disconnect battery See: Starting and Charging/Battery/Service and Repair/Procedures/Instructions for Disconnecting and Connecting Battery.
Release bolt (1).
Detach retaining bar (2) from control unit.
Tightening torque 24 61 1AZ See: Specifications.
Disconnect plug (3) and remove control unit from mounting.
Important!
The adaptation values must be reset after the control unit has been replaced.
Note:
Illustration similar.