Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)
/l4-1.6l_sc_(w11)/Page-1484001.png)
Alignment: Service and Repair
Adjusting Toe-In and Camber on Front Axle
32 00 601 - Adjusting toe-in on front axle
Note:
Refer to Troubleshooting if wheel camber is not in the specified target range.
Adjusting toe-in/toe-differential angle: Move wheels and steering gear to straight-ahead position.
Release lock nut (1).
Adjust toe-in to specified value by turning tie rod at hexagon (2).
Installation:
Make sure that gaiter (3) of tie rod does not turn as well.
Important!
Tie rods with lock screw connection:
