Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)
/l4-1.6l_sc_(w11)/Page-1192001.png)
Seals and Gaskets: Service and Repair
Removing Radial Shaft Seal of Right Axle Shaft (AISIN)
24 21 230 - Removing radial shaft seal of right axle shaft (AISIN)
Special tools required:
-
23 0 490 See: Manual Transmission/Transaxle/Tools and Equipment/Manufacturer Tools/23 0 490 Extractor
-
24 4 300
Necessary preliminary tasks:
-
Drain off transmission oil See: Fluid - A/T/Service and Repair.
-
Remove right axle shaft See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removing and Installing/Replacing Right
Drive Shaft.
Drive a hole into radial shaft seal using a center punch.
Important!
Do not use a drill as drillings may result in transmission malfunction.
Screw special tool 23 0 490 See: Manual Transmission/Transaxle/Tools and Equipment/Manufacturer Tools/23 0 490 Extractor into radial shaft seal.
Drive out radial shaft seal (1) with impact weight (2).
