Cooper S Convertible (R52) L4-1.6L SC (W11) (2005)
/l4-1.6l_sc_(w11)/Page-2366002.png)
Slacken screws (1) on power window unit (2) (do not release fully).
3AZ Power window unit to body......................................................................................................................................................................................8 Nm
Pull out power window unit (1) towards top slightly.
Lift out cable holder (2) from power window unit (1).
Disconnect plug connection (3) on flat motor (4).
Remove power window unit (1).
Presettings after fitting power window unit:
Preset dimension (A) at power window unit (1) (window glass breakage); only then may the power window unit (1) be actuated.
Dimension (A) = 18.5 mm
