Cooper S Convertible (R57) L4-1.6L Turbo (N14) (2009)
Installation Note:
-
Refer to the procedure for installing fuel injector See: Fuel Injector/Service and Repair if a fuel injector (2) detached from the cylinder head (4)
while removing the high-pressure rail
-
Replace retainer (1)
-
Replace seal (6) and support ring (5), making sure support ring (5) is seated correctly
-
Make sure guide pin (3) of fuel injector (2) is correctly positioned in designated hole in cylinder head (4)
Assemble engine.
Check fuel system for leaks. See: Fuel Pressure/Testing and Inspection/Pressure Line Leak Test
Check function of DME.