mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Intercooler Duct|Service and Repair|Page 6223 > < Diagram Information and Instructions|Page 6217
Page 1
background image

Intercooler Duct: Service and Repair

11 61 365 - Replacing left charge-air duct (N14)

Important!

Charge-air hoses with clamp fastenings must be installed dry and free from grease!
Sealing faces and fittings must be dry and free from grease.
If gaiter and charge-air hoses with clamp fastenings are not installed dry and free from grease, this may result in turbocharger failure!

Release screw and disengage coolant expansion tank (1) from rubber mount.
Lay expansion tank (1) to one side (do not remove).

Installation Note:

Make sure bearing journal is installed in correct position in rubber mount.

Release clamp (2) and detach charge-air duct (3).

Installation Note:

Install charge-air duct (3) dry and free from grease.
Fitting on turbocharger must be dry and free from grease.

Intercooler Duct|Service and Repair|Page 6223 > < Diagram Information and Instructions|Page 6217