Cooper S Convertible (R57) L4-1.6L Turbo (N18) (2011)
/l4-1.6l_turbo_(n18)/Page-282001.png)
Sound Proofing / Insulation: Locations
41 00 ... - Position of shaped parts for cavity bulkhead
Cavity sealing is carried out in specific body areas in order to reduce internal noise and to reduce condensate. To do this, shaped parts are inserted in the
cavities. These shaped parts adapt themselves optimally due to heating of the body to approx. 180 °C by expansion to the shape of the cavities.
Because it is not possible to heat the body to this extent for a body repair, a different procedure has been specified for this situation.
