Montero Sport V6-3.5L SOHC (2004)
3. Align the mating marks on the yoke and propeller shaft, and install the propeller shaft journal bearings.
>>C<< SNAP RING INSTALLATION
1. Install a snap ring to one side of the journal.
2. Use special tool MB990840 and MB991410 at the opposite side of the installed snap ring to press in the journal bearing toward the snap ring.
CAUTION: Always use snap rings of equal thickness on both sides.
3. Install the snap ring on the opposite side, and measure the clearance of the snap ring groove with a feeler gauge.
Standard value (A): 0.06 mm (0.002 inch) or less