200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
Fig. 7 Removing Compressor Gussets
Fig. 8 Aluminum Oil Pan Bolt Removal Sequence
Fig. 9 Repositioning Transaxle Bolts
9.
Remove compressor gussets, Fig. 7.
10.
Remove oil pan rear cover plate.
11.
Remove aluminum oil pan bolts in sequence shown, Fig. 8.
12.
Remove two engine to transaxle bolts and install them into vacant holes, Fig. 9.
13.
Tighten bolts to release aluminum oil pan from cylinder block.
14.
Remove aluminum oil pan using oil pan remover tool. Use care not to damage aluminum oil pan when inserting oil pan remover tool.
15.
Remove two engine to transaxle bolts previously install in aluminum oil pan.
INSTALLATION
Fig. 10 Applying Liquid Gasket To Oil Pan