200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
Crankshaft Main Bearing Seal: Service and Repair
1. On models with manual transaxle, remove transaxle assembly as outlined under "Transaxle, Replace" in "Clutch & Manual Transmission".
2. On models with automatic transaxles, remove transaxle assembly as outlined in "Automatic Transmissions/Transaxles".
3. Remove flywheel or driveplate.
4. Remove rear oil seal.
5. Reverse procedure to install, applying engine oil to new seal before installation.