200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
![background image](/nissan/200sx/l4-1998cc_2.0l_dohc_mfi_(sr20de)/Page-498008.png)
32. Install intake manifold supports.
33. Install valve cover, then using sequence shown in Fig. 29, tighten nuts as follows:
a. Torque nuts 1, 10, 11 and 8 to 2.9 ft. lbs.
b. Torque nuts 1 through 13 to 7.2 ft. lbs.
34. Reverse remaining removal steps for installation procedures.