200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
Fuel Filler Cap: Testing and Inspection
FUEL TANK VACUUM RELIEF VALVE
1. Wipe clean valve housing.
2. Suck air through the cap. A slight resistance accompanied by valve clicks indicates that valve A is in good mechanical condition. Note also
that, by further sucking air, the resistance should disappear with valve clicks.
3. Blow air on fuel tank side and ensure that continuity of air passage exists through valve B.
4. If valve is clogged or if no resistance is felt, replace cap as an assembly.