200SX SE-R L4-1998cc 2.0L DOHC MFI (SR20DE) (1998)
19. Remove old liquid gasket from mating surface of LH camshaft end bracket.
-
Also remove old liquid gasket from mating surface of cylinder head.
20. Apply liquid gasket to mating surface of LH camshaft end bracket as shown in illustration.
-
Use Genuine RTV silicone sealant Part No. 999 MP-A7007, Three Bond TB1207D or equivalent.
21. Install camshafts, camshaft brackets, oil tubes, and baffle plate.
-
Position camshaft.
-
LH camshaft key at about 12 o'clock.
-
RH camshaft key at about 12 o'clock.
-
Apply new engine oil to bearing and cam surfaces of camshafts before installing them.
-
Position camshaft brackets as shown in the illustration. Apply new engine oil to threads and seating surfaces of camshaft bracket bolts before
installing them.
-
Arrange bolts (Size and length).
(A): M6 x 53.8mm (2.12 inch)
(B): M6 x 37 mm (1.46 inch)
(C): M8 x 35 mm (1.38 inch)
(D): M6 x 64 mm (2.52 inch)