200SX SE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
^
Reverse procedure to install, noting the following:
^
When installing front sensor rotor, use hammer and wooden block.
^
Always replace sensor rotor with new one.
Rear
REMOVAL
Rear Wheel Sensors
CAUTION: Be careful not to damage sensor edge and sensor rotor teeth. When removing the front or rear wheel hub assembly, disconnect the ABS
wheel sensor from the assembly and move it away.
1. Remove the rear wheel hub, refer to "Steering and Suspension"
Rear ABS Sensor Removal
2. Remove the sensor rotor using suitable puller, drift and bearing replacer.
INSTALLATION
^
Reverse procedure to install, noting the following:
^
When installing rear sensor rotor, use suitable drift and press.
^
Always replace sensor rotor with new one.