Nissan and Datsun Workshop Service and Repair Manuals

Gear: Specifications

Baulk Ring And Gear Clearance

1st & 2nd:

 Standard .....................................................................................................................................................  1.0 - 1.35 mm (0.0394 - 0.0531 inch)
Wear Limit .............................................................................................................................................................................  0.7 mm (0.028 inch)

3rd & 4th:

 Standard .....................................................................................................................................................  1.0 - 1.35 mm (0.0394 - 0.0531 inch)
Wear Limit .............................................................................................................................................................................  0.7 mm (0.028 inch)

5th:

 Standard .....................................................................................................................................................  1.0 - 1.35 mm (0.0394 - 0.0531 inch)
Wear Limit .............................................................................................................................................................................  0.7 mm (0.028 inch)

End Play:

Main Gear:

1st ..............................................................................................................................................................  0.18 - 0.31 mm (0.0071 - 0.0122 inch)
2nd ............................................................................................................................................................  0.20 - 0.30 mm (0.0079 - 0.0118 inch)
3rd .............................................................................................................................................................  0.20 - 0.30 mm (0.0079 - 0.0118 inch)
4th .............................................................................................................................................................  0.20 - 0.30 mm (0.0079 - 0.0118 inch)

Input Gear:

5th .............................................................................................................................................................  0.18 - 0.31 mm (0.0071 - 0.0122 inch)