240SX L4-2.4L (KA24DE) (1993)
Oxygen Sensor: Service and Repair
Oxygen Sensor
REMOVAL
1.
Disconnect harness terminal.
2.
Remove sensor with suitable socket or wrench.
INSTALLATION
1.
Apply a thin coating of anti-seize compound to the threads.
NOTE: Do not contaminate sensing tip with compound.
2.
Install sensor and torque it to 40 - 50 N-m (4.1 - 5.1 kg-m, 30 - 37 lb.ft.).
3.
Apply a thin coating of dielectric compound to the connector.
4.
Connect harness terminal.