240SX L4-2389cc 2.4L SOHC MFI (KA24E) (1989)
Turn Signal Switch: Service and Repair
1.
Disable airbag as described under MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
Remove steering column shell covers.
3.
Disconnect switch electrical connections.
Combination Switch/Replacement
4.
Remove retaining screws and switch.
It is not necessary to remove combination switch base to replace light switch.
5.
Reverse procedure to install, then rearm airbag as described under MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.